Enterasys Networks RBT-8200 Manual de usuario descargar pdf (Pagina 38)

WARNING: English (US)

B-2 Wireless Switch Safety Warnings

WARNING: English (US)

Thepowersupplyinthisproductcontainsnouser‐serviceableparts.Theremaybemore

thanonesupplyinthisproduct.Referservicingonlytoqualifiedpersonnel.

DonotattempttomodifyorusethesuppliedACpowercordifitisnottheexacttype

required.Aproductwithmore

thanonepowersupplywillhaveaseparateACpower

cordforeachsupply.

ThepowerbuttononthesystemdoesnotturnoffsystemACpower.ToremoveAC

powerfromthesystem,youmustunplugeachACpowercordfromthewalloutletor

powersupply.

Thepowercord(s)is

consideredthedisconnectdevicetothemain(AC)power.The

socketoutletthatthesystemplugsintoshallbeinstalledneartheequipmentandshallbe

easilyaccessible.

SAFETYSTEPS:Wheneveryouremovethechassiscoverstoaccesstheinsideofthe

system,followthesesteps:

1. Turnoffallperipheraldevices

connectedtothesystem.

2. Turnoffthesystembypressingthepowerbutton.

3. UnplugallAC powercordsfromthesystemorfromwalloutlets.

4. LabelanddisconnectallcablesconnectedtoI/Oconnectorsorportsonthebackof

thesystem.

5. Providesomeelectrostaticdischarge(ESD)protectionbywearinganantistatic

wrist

strapattachedtochassisgroundofthesystem—anyunpaintedmetalsurface—when

handlingcomponents.

6. Donotoperatethesystemwiththechassiscoversremoved.

AfteryouhavecompletedthesixSAFETYstepsabove,youcanremovethesystem

covers.Todothis:

1. Unlockandremovethepadlockfromthebackofthe

systemifapadlockhasbeen

installed.

2. Removeandsaveallscrewsfromthecovers.

3. Removethecovers.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 49 50

Sin comentarios

Enterasys Networks RBT-8200 Manual de usuario Pagina 38