Enterasys-networks ANG-1000 Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
8
Aurorean Network Gateway-1000 Users Guide
Connecting Power to the ANG-1000 Chapter 2
Installation
A switching power supply including a 6’ power cord and a 7’ electrical cord
with an attached power supply is supplied with each system. To connect
these items to an ANG-1000, perform the following steps:
1 Plug the power supply cord into the systems power socket as shown
in Figure 8.
Figure 8 Connecting AC Power on the ANG-1000
2 Plug the correct end of the AC power cord into the power supply and
the other end into a grounded AC outlet or UPS as shown in Figure 9.
The front Power LED will light the moment you power up the unit.
Figure 9 Connecting the Power Cable to the Power Supply
NOTE
International customers may swap the electrical cord segment shipped
with the ANG-1000 for a cord that meets the proper standard for their
country. A custom cord can be inserted in the power supply.
Power supply cable
Power supply
AC power cord
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

Comentarios a estos manuales

Sin comentarios