Enterasys-networks VHSIM2-A6DP Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
Installing APIMs
2-2 Installation
2.2 INSTALLING APIMs
To install an APIM into the VHSIM2-A6DP, proceed as follows:
1. Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap package).
2. Remove and save the faceplate screws attaching the faceplate to the VHSIM2-A6DP. See
Figure 2-1. Remove the VHSIM2-A6DP faceplate.
3. Remove and save the three screws from the VHSIM2-A6DP standoffs. Remove the APIM
coverplate.
NOTE: To install VAPIMs, refer to Section 2.3.
ELECTRICAL HAZARD: Only qualified personnel should install or service this unit.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 117 118

Comentarios a estos manuales

Sin comentarios