Enterasys-networks Enterasys Gold Distributed Forwarding Engine 4H428 Manual de usuario descargar pdf (Pagina 84)

Memory Locations and Replacement Procedures

B-10 Mode Switch Bank Settings and Optional Installations

3. PulltheDRAMSIMMstraightupandremoveitfromtheconnector.

Installing the DRAM SIMM on 4H4203-72

ToinstalltheDRAMSIMM,refertoFigure B‐12andproceedasfollows:

1. PushtheconnectorarmsawayfromtheDRAMSIMMenoughtoinserttheDRAM

SIMMintotheconnectorfingers.

2. InserttheDRAMSIMMstraightdownbetweentheconnectorfingersenoughforthe

tabsontheconnectorarmstoalign

withthetwoDRAMSIMMalignmentnotches.

3. PushtheDRAMSIMMdownintothe connectorfingers.Thenrotatethetwo

connectorarmstowardtheDRAMSIMMtolockitintoplace.

Figure B-11 Removing Existing DRAM SIMM from 4H4203-72

1 Connector arms 2 Connector 3 DRAM SIMM

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones

de seguridad para evitar descargas de electricidad estática.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 90

Sin comentarios

Enterasys-networks Enterasys Gold Distributed Forwarding Engine 4H428 Manual de usuario Pagina 84