Enterasys Networks CSX7000 Manual de usuario Pagina 312

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 729
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 311
USER’S GUIDE
312 CyberSWITCH
Routers shown in the diagram above. Sample configurations for the objects in the above network
diagram are as follows:
Note: The DHCP Server must have a route specified to get back to the DHCP-enabled router
Ruby, or use Alex as its default gateway.
Configuration for IP Router "Alex" Configuration for IP Router "Ruby"
System Information:
System Name = Alex
System Password = stone
System Information:
System Name = Ruby
System Password = rubble
Security Level = Device Level (On-node
Device Database, PAP security)
Security Level = Device Level (On-node
Device Database, PAP security)
Bridging disabled Bridging disabled
IP enabled (router mode)
I/F = LAN (192.168.1.168)
I/F = WAN (192.168.10.168)
Static Route = (dest) 204.157.42.0
(next hop) 192.168.10.1
IP enabled (router mode)
I/F = LAN (204.157.42.168)
I/F = WAN (192.168.10.1)
DHCP enabled
Relay Destination #1 = 192.168.1.5
(interface =N/A”)
Hop Count Threshold = 4
DHCP enabled
Relay Destination #1 = 192.168.10.168
(interface = “N/A”)
Hop Count Threshold = 4
Device = “Ruby”
ISDN Line Protocol = PPP
Dial Out Phone # = 5311
PAP Password = “rubble”
IP Address = 192.168.10.1
IP Routing = enabled
Make calls for IP data = enabled
Bridging = disabled
Device = “Alex
ISDN Line Protocol = PPP
Dial Out Phone # = 5411
PAP Password = “stone”
IP Address = 192.168.10.168
IP Routing = enabled
Make calls for IP data = enabled
Bridging = disabled
Vista de pagina 311
1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 728 729

Comentarios a estos manuales

Sin comentarios